Regarding the equipment inspection matters before the start of construction, HEDAO introduced the "five-step method of safety inspection" and explained in detail how to safely enter the field of cross-country scissor fork aerial work platform. This article will introduce you to the first step of safety inspection!
Safety inspection The first step is to perform a visual inspection. All markings, labels and nameplates of the off-road clip-and-fork aerial work platform must be in good condition, clean and legible. Platform, boom (fork), turntable, chassis, engine and other components have no missing parts, fixed firmly, and no visible damage, cracks or excessive wear. Platform, boom (fork), turntable, chassis, engine and other components have no missing parts, fixed firmly, and no visible damage, cracks or excessive wear.
Check whether there is oil pollution, construction waste, paint and other untidy phenomena, clean up and keep clean in time. Check whether the hydraulic oil is missing through the hydraulic oil level meter. If there is any missing, the same type of hydraulic oil needs to be added in time. Check whether the fuel tank oil level is sufficient, the color is clear, if there is a problem need to replace the fuel or clean the tank in time. Check whether there is water at the bottom of the oil-water separator, and drain the water in time. Use the freezing point tester to test the low temperature resistance of the engine coolant, whether it is below the local historical minimum temperature of 5℃ or more. If it does not meet the requirements, it is necessary to drain the coolant in the engine and radiator, and then re-add the qualified coolant when the equipment is used.
Check whether the air filter cleanliness of cross-country shear fork aerial work platform meets the standard. Observe the oil level through the oil scale. In principle, the oil level is slightly lower than the median, and cannot be too high or too low. Discharge a little oil through the oil pan discharge port, observe whether the water emulsification or other debris, if there is a problem, find the cause in time for troubleshooting. Check whether there is metal and water in the battery battery box, whether the liquid level of the battery is normal, whether the pile head of the battery is corroded, and whether the connection is firm. If there is a problem, clean or replace it in time. When the connection line is corroded, oxidized, etc., replace the connection line in time.
Use a multimeter to check whether the battery voltage of the cross-country scissor aerial work platform is normal. If any exception occurs, charge the battery in time. Check whether all the reducer oil level is sufficient, gear oil is deteriorated, if there is a problem, please add or replace in time. Check whether there is a lack of butter where the machine needs to be lubricated. If it is necessary to add butter, inject an appropriate amount of lithium based butter through the butter nozzle. Check all the cylinder block is deformed, lever surface is not strained or solidified, if necessary, please timely clean or repair replacement.
The rest of the five-step safety check method will be introduced in the next article. HEDAO specializes in the production of various types of aerial work platforms, mainly self-walking scissor fork aerial work platform, cross-country scissor fork aerial work platform, curved arm aerial work platform, etc., which can be customized and functional configuration according to customers' working environment requirements. Welcome business customers to inquire.