1 System startup error or failure to start: If the various parts of the equipment cannot be checked, lubricated, and confirmed to be normal before startup, the system cannot start normally
2. The operation interface cannot be displayed or operated abnormally: If the operator needs to obtain an operation certificate and be familiar with the performance of the grinder, but the operation interface cannot be displayed or operated normally 3. Equipment malfunction: Do not leave the grinder while working. If you need to leave, stop the machine. The equipment cannot function properly 4. Abnormal sound or vibration of the equipment: If there is abnormal sound or vibration of the equipment, daily maintenance should be done after work, and the handover record book should be carefully filled out 5. Equipment temperature too high or too low: If regular maintenance includes replacing lubricating oil, cleaning the oil tank, etc., the equipment temperature may be too high or too low 6. Equipment malfunction alarm: Methods for fault analysis include visual method, alarm method, condition visualization method, parameter verification method, etc., and equipment malfunction alarm is triggered 7. Equipment cannot stop normally: After confirming the cause of the fault, spare parts replacement method or parameter modification method can be used for maintenance, but the equipment cannot stop normally The above are possible fault manifestations of the fully automatic CNC bearing outer ring groove grinder. If these situations occur, the equipment should be stopped immediately and the equipment manufacturer or professional maintenance personnel should be contacted for repair来源:http://en.zjsxds.cn/news1048447.html