The dynamic and static pressure spindle is a high-precision machining equipment, and its installation process needs to pay attention to the following aspects:
1 Preparation for equipment installation: Firstly, it is necessary to prepare the installation equipment for the dynamic and static pressure spindle, including the installation platform, hydraulic chuck, hydraulic system, and air source
2. Installing protective devices: In order to ensure the safety of the installation process, it is necessary to install safety protection devices such as safety nets, seat belts, etc 3. Installing the spindle: Place the dynamic and static pressure spindle on the installation platform and adjust its position to ensure its verticality. At the same time, attention should be paid to the installation position and method of the bearings to ensure the normal operation of the spindle 4. Install hydraulic chuck: Install the hydraulic chuck on the dynamic and static pressure spindle, adjust its position, and ensure that it is firmly connected to the spindle 5. Installation of hydraulic system: Install the hydraulic system on the installation platform and connect it to the hydraulic chuck to ensure its normal operation 6. Install the air source: Install the air source on the installation platform and connect it to the hydraulic system to ensure its normal operation 7. Installation of control system: Install the control system on the installation platform and connect it to the hydraulic system and air source to ensure the normal operation of the control system 8. Debugging equipment: After installation, it is necessary to debug the dynamic and static pressure spindle to ensure its stable operation, good rigidity, and good smoothness 9. Installation of protective cover: After debugging is completed, a protective cover needs to be installed to protect the safety of the dynamic and static pressure spindle and equipment The above is the installation process of the dynamic and static pressure spindle. It should be noted that during the installation process, it is necessary to strictly follow the operating procedures to ensure the safety of the installation process and the normal operation of the equipment来源:http://en.zjsxds.cn/news1048446.html