As a core component of textile machinery, the installation environment of the electronic jacquard faucet machine needs to meet various requirements such as spatial layout, temperature and humidity control, power supply, dust and shock prevention, mechanical installation accuracy, lighting and operation space, safety protection, etc. The specific requirements are as follows:
1. Space layout and environmental requirements
Installation position: The center of the jacquard faucet should be aligned with the center of the weaving machine (fabric centerline), and the center of the front and rear positions should be aligned with the center of the target plate to reduce uneven friction between the thread and the target plate hole. The installation height should be moderate, and when the weaving width is large, the height should be appropriately increased to reduce the friction between the thread and the target plate.
Environmental temperature and humidity: The installation environment should be kept dry, ventilated, and avoid moisture and corrosive gases.
. It is recommended to control the temperature between 15 ℃ -35 ℃ and the humidity between 40% -70% to prevent the equipment from getting damp or overheated. Dust prevention requirements: The installation environment should be kept clean to prevent dust and debris from entering the interior of the equipment and affecting its normal operation.II. Power and Grounding Requirements
Power Stability: The electronic jacquard faucet machine has high power requirements and needs to provide stable three-phase AC power (usually 380V) and be equipped with a voltage regulator to prevent voltage fluctuations from affecting equipment operation.
. Grounding protection: The equipment must be reliably grounded with a grounding resistance of less than 4 Ω to prevent leakage and static electricity accumulation, ensuring the safety of operators.III. Seismic and Noise Reduction Requirements
Seismic Measures: The installation environment should be away from vibration sources, such as large motors, punching machines, etc.
. The equipment foundation needs to be firm, and shock-absorbing pads or dampers can be used to reduce vibration transmission. Noise reduction requirements: The equipment generates a certain amount of noise during operation, and the installation environment must comply with national noise standards (usually not exceeding 85 decibels). Noise can be reduced by installing mufflers or soundproof covers.Fourth, Mechanical Installation Accuracy Requirements
Levelness Adjustment: When installing the jacquard faucet machine, it is necessary to ensure levelness, and the horizontal error should be less than 0.1mm/m.
. It can be adjusted through a level to ensure smooth operation of the equipment.Verticality adjustment: The verticality of the jacquard dragon head machine and the weaving machine should be consistent, and the vertical error should be less than 0.2mm/m.
. It can be achieved by adjusting the device legs or washers.Centering adjustment: the centering accuracy between the jacquard head machine and the loom should be high, and the centering error should be less than 0.5mm. This can be achieved by adjusting the equipment position or using centering tools.
Fifth, Lighting and Operating Space Requirements
Lighting Requirements: The installation environment should provide sufficient lighting, with an illuminance greater than 300lux, to ensure that operators can clearly observe the operation status of the equipment.
.Operating space: Sufficient operating space should be left around the equipment for operators to debug, maintain, and repair.
. The width of the operating space should be greater than 1m and the height should be greater than 2m.VI. Safety Protection Requirements
Protective Devices: Equipment should be equipped with safety devices such as protective covers and guardrails to prevent operators from touching moving parts and ensure operational safety.
Warning signs: Safety warning signs such as "High voltage danger" and "Do not touch" should be posted on the equipment to remind operators to pay attention to safety.
.