When using the electronic jacquard faucet machine, the following key points should be noted to ensure stable operation and extend service life:
Before operation, check the electrical system: ensure stable power supply voltage, check whether each electrical switch and button operation is flexible, whether each connector is firmly plugged in, and whether the contact is good.
Mechanical components: Check whether the temperature rise of each bearing housing is normal, and each needle should be kept flat without bending.
.Safety protection: Confirm that the safety protection device is configured safely and installed firmly. The grounding terminal of the electrical system should have clear markings, and the resistance between potentially live metal parts and the grounding terminal should meet safety requirements.
. Monitoring noise control during operation: The average A-level sound pressure level of the equipment during operation should be ≤ 89dB (A), and if exceeded, it should be checked in a timely manner. Jacquard control: Ensure reliable operation of jacquard control, no disorder in jacquard program, and avoid production accidents caused by program errors.Parameter setting: When setting production parameters through the control system, it is necessary to ensure that the parameters are accurate and avoid affecting product quality due to parameter errors.
.Maintenance and upkeep Regular lubrication: Lubricate all parts of the machine, such as the spindle bearings and the needle drive shaft, every certain operating hour to ensure sufficient lubrication.
.Component replacement: Regularly inspect vulnerable parts such as vertical and horizontal needles. If wear or damage is found, they should be replaced in a timely manner to avoid affecting production efficiency.
. Cleaning and maintenance: Regularly clean the surface and interior of the equipment to prevent dust and debris from affecting its operation.Fault handling and power-off protection: The equipment has power-off protection function. If a power outage occurs, the equipment status should be checked before restarting to ensure that there are no abnormalities.
.Troubleshooting: If the equipment malfunctions, the cause should be promptly investigated to avoid running with problems.
. For example, if the hole selection needle cannot accurately fall into the hole of the patterned plate, the intermittent motion time of the patterned plate drum needs to be readjusted. Professional maintenance: For complex faults, they should be repaired by professionals to avoid equipment damage caused by improper operation.Safety operation regulations: Operators need to undergo professional training, be familiar with equipment operation procedures, and avoid illegal operations.
.Protective measures: Necessary protective equipment such as gloves, goggles, etc. should be worn during operation to ensure personal safety.
.Emergency stop: The equipment should be equipped with an emergency stop device, and the operator should be familiar with the emergency stop operation to ensure that it can be quickly stopped in the event of an abnormality.
.