UPS uninterruptible power supply solution solves the problems of low power supply efficiency, difficult expansion, poor availability, and difficult monitoring of UPS power supply system with reliable, efficient, and simple design ideas, while ensuring reliable power supply. Guyiying Battery provides you with a solution to UPS uninterruptible power supply, and we hope you can pay attention to it when using it.
1. Do not over discharge the battery of UPS power supply: after the mains power is cut off, the UPS will be switched to battery power supply. When the battery is used and there is only one cell left in the battery indicator light, the UPS should be shut down immediately to avoid over discharge of the battery. Excessive battery discharge will cause the battery unable to be recharged and affect the service life of the battery. The fault caused by excessive battery discharge is not covered by the warranty;
2. During the use of UPS battery, if there is no power failure within half a year, it is recommended to charge and discharge the battery artificially, that is, turn off the mains power and use the battery to discharge. When the battery indicator light has 2-3 cells left, reconnect the battery to the mains power. Artificial charging and discharging can prolong the service life of the battery;
3. It is recommended that the load of UPS battery should not exceed 80%;
4. The battery shall be charged with load: the UPS will automatically recharge after using the battery power due to power failure. At this time, the UPS must be charged with the load equipment. At the same time, the load equipment is in the open state. Do not charge with light load or no load. Xinchang Guyiying Electronic Technology Co., Ltd. provides various lead-acid battery packs for electric forklift batteries, golf cart batteries, sightseeing vehicles, patrol vehicles, tour buses, tractors, solar energy, UPS, automobiles, ships, mining locomotives and other vehicle equipment.