The spray diameter of metal swing arm sprinkler heads is usually between 10 meters and 30 meters, and the specific value is affected by the following factors:
Nozzle model and specifications: Different models of metal swing arm sprinkler heads have different design parameters, such as nozzle diameter, spray angle, etc., which directly affect the spray diameter. For example, some models of nozzles can spray a diameter of over 20 meters at specific working pressures.
Working pressure: Working pressure is a key factor affecting the jet diameter.
. Generally speaking, the higher the working pressure, the larger the spray diameter. For example, within a pressure range of 1.5 to 3.5 kilograms, the spray diameter may be between 10 and 20 meters; At higher pressures, the jet diameter may exceed 20 meters.Nozzle diameter: The size of the nozzle diameter directly affects the flow rate and velocity of the water flow, which in turn affects the spray diameter.
. A larger nozzle diameter typically produces a larger spray diameter, but may also increase the size of water droplets and reduce atomization efficiency. Spray angle: Spray angle refers to the angle between the water flow sprayed by the nozzle and the horizontal plane. Appropriate jet elevation angle can optimize the distribution and coverage of water flow, thereby affecting the jet diameter. For example, some nozzles can improve the uniformity of water flow while maintaining a larger spray diameter by adjusting the spray angle. Environmental factors: Wind speed, direction, and other environmental factors can also affect the jet diameter. Under windy conditions, water flow may be blown away or offset, resulting in a decrease in actual jet diameter or uneven coverage.